Custom Gates in Alameda, CA
Custom-fabricated driveway, entry, garden, and security gates in iron, steel, and aluminum — automation-ready and built to match your railings. Free on-site estimates.
Custom gates fabricated to match your home
A gate is the first thing visitors see and the last line of security for your property, so it should look intentional and work flawlessly for years. Because we fabricate in our own shop, your gate is designed around your actual opening, slope, and home style — not trimmed from a stock panel that almost fits. Alameda Custom Railing builds custom driveway, entry, garden, and security gates in ornamental iron, structural steel, and powder-coated aluminum across Alameda County and the East Bay.
As a locally owned, licensed and insured shop with C-23 ornamental-metal craftsmanship, we match a gate to an existing railing set so your fence, rail, and gate read as one system — and build every gate automation-ready so you can add an operator now or later. For a free on-site consultation, call (510) 555-0100.
Licensed & Insured C-23 Ornamental Metal Automation-ReadyWhat it is and who it's for
Custom gate work covers any fabricated gate built to a specific opening: swing or sliding driveway gates, pedestrian entry gates at a walkway or courtyard, garden and side-yard gates, and security gates that harden an entrance. "Custom" is the key word — East Bay lots are rarely square or level and openings vary by inches, so a gate that latches cleanly and swings true has to be built to measurement.
This service is for homeowners adding curb appeal or security, owners of Victorian and Craftsman homes who want a period-correct ornamental gate, and property owners who want a gate that matches railings we have already built. If you are coordinating a whole exterior, pair this with our Wrought Iron Railings so gate and rail share the same profile and finish.
Gate types & materials
We match both the gate style and the metal to the job — how it opens, how much security you want, and how much salt air it faces.
Driveway gates
Swing or slide, single or dual-leaf, sized to your driveway width and slope. Built with heavier structural steel framing for the span and weight.
Entry & pedestrian gates
Walkway, courtyard, and front-entry gates in ornamental iron or aluminum, sized and hinged to swing true on uneven ground.
Garden & side-yard gates
Lighter iron or powder-coated aluminum gates for side yards and gardens, with weather-resistant latches and hardware.
Security gates
Reinforced steel gates that harden an entrance without looking like a cage, with solid latching and lock provisions.
Materials are hand-forged and welded ornamental iron and mild carbon steel for strength and detail, or powder-coated aluminum where rustproof and lightweight matters — finished with oven-cured powder coat and galvanizing where exposure calls for it.
Automation-ready fabrication
Whether or not you add an operator today, we build every driveway and entry gate to accept automation later: correctly weighted, balanced leaves, hinge and post sizing rated for an operator's load, and framing that will not sag or bind when a motor takes over. That means you can add a swing or slide operator, keypad, or intercom down the road without rebuilding the gate. We coordinate with your automation and electrical installer so the mechanical side we fabricate is right the first time.
Matching gates to railing sets & historic homes
The detail that makes a custom gate look built-in rather than bolted-on is consistency: the same picket profile, top-rail curve, and powder-coat color as the railing beside it. Because we fabricate railings and gates in one shop, we carry a single design language across your fence, rail, and gate. On the East Bay's deep stock of Victorian and Edwardian homes — Alameda's Gold Coast and East End are full of them — that means ornamental iron gates with period-correct scrollwork that honors the architecture. For Craftsman and bungalow homes in Oakland and Berkeley, we scale the detailing to suit the house.
Our process
On-site consult & measure
We measure the opening, check slope and swing clearance, and talk through style, security, and any automation plans.
CAD & shop drawings
Drawings that set the leaf sizes, picket profile, and hardware — and match an existing railing set if you have one.
Engineering review
We size framing, hinges, and posts for the gate's span and weight, and for an operator's load if it will be automated.
Shop fabrication & welding
Hand-forged and welded in our shop so the gate is square, true, and built to your exact opening.
Finishing
Powder coat and galvanizing chosen for your salt-air exposure and color.
Installation & anchoring
We set and anchor the posts to solid, seismic-appropriate structure so the gate swings true and stays aligned.
Built for the East Bay
A gate lives entirely outdoors and moves constantly, so our two local conditions hit it harder than a fixed railing. Salt air comes first: near sea level on the Alameda island and along the shoreline, chloride corrosion attacks hinges, latches, and frames — the exact moving parts a gate depends on. We fabricate with corrosion-resistant hardware, oven-cured powder coat, and galvanizing so a coastal gate keeps swinging smoothly instead of seizing up with rust.
The second is seismic. The Hayward Fault runs through Oakland, Berkeley, San Leandro, and downtown Hayward, and a heavy driveway gate is only as reliable as its posts — ground movement and settling throw a gate out of alignment so it drags or will not latch. We anchor gate posts to solid, seismic-appropriate structure with correctly sized fasteners so the gate stays plumb and true, which also protects any operator you add later from the strain of a misaligned leaf.
Honest price ranges
Gate pricing spans a wide range because a light garden gate and an automated dual-leaf driveway gate are very different builds. Our ornamental iron and steel fabrication generally falls in these ranges; hand-forged detail and Bay Area labor push toward the high end, and automation hardware is quoted separately.
| Type | Installed per linear foot | Typical project |
|---|---|---|
| Wrought iron / ornamental | $65–$135 (hand-forged $300–$900) | ~$700–$6,000 |
| Powder-coated aluminum | $50–$200 | ~$400–$4,800 |
Permits, where required, run about $50–$500, and the gate operator, keypad, and electrical are a separate line handled with your automation installer. These are honest ranges to set expectations, not a bid — the accurate number comes from a free on-site estimate. Call (510) 555-0100.
Available across the East Bay
We design, fabricate, and install custom gates throughout Alameda County and the East Bay: period-correct ornamental gates for the Victorians of Alameda, Craftsman-scaled entry gates in Oakland and Berkeley, practical driveway and security gates in San Leandro, and hillside driveway gates in Hayward and Castro Valley. Every gate is built to your opening and finished for your exposure.
Related services
Questions, Answered
Can you match a new gate to my existing railings?
Yes — and it is one of the main reasons to use a custom shop. Because we fabricate railings and gates under one roof, we can carry the same picket profile, top-rail shape, and powder-coat color across your fence, rail, and gate so they read as one coordinated system rather than mismatched parts.
Do I have to automate the gate now?
No. We build every driveway and entry gate automation-ready — properly weighted leaves and hinge, post, and framing sizing that will accept an operator's load — so you can add a swing or slide operator, keypad, or intercom later without rebuilding the gate. When you are ready, we coordinate with your automation and electrical installer.
What gate material holds up best near the coast?
For near-sea-level and shoreline properties we use corrosion-resistant hardware, oven-cured powder coat, and galvanizing on iron and steel, or powder-coated aluminum where a rustproof, lighter gate is preferred. The hinges and latches matter most, since salt air attacks the moving parts first, so we specify those for your exposure.
Can you build a period-correct gate for a Victorian?
Yes. The East Bay — and Alameda especially — has a deep stock of Victorian and Edwardian homes, and we fabricate ornamental iron gates with period-appropriate scrollwork and picket detailing that suit the architecture. For Craftsman and bungalow homes we scale the detailing to match the house instead.
Why does a gate need special anchoring in the East Bay?
A gate moves constantly and is heavy, so its posts take real stress — and the Hayward Fault runs through much of the East Bay, where ground movement and settling throw gates out of alignment so they drag or will not latch. We set and anchor posts to solid, seismic-appropriate structure with correctly sized fasteners so the gate stays plumb and swings true for years.
Ready to get started?
Alameda Custom Railing provides fast, same-day custom railing across Alameda, CA and the surrounding area — flat-rate pricing, licensed and insured, with 24/7 emergency service. Call now, request a free estimate or head back to our homepage.